工程圍擋是一種為了將建設施工現場與外部環境隔離開來，使施工現場成為一個相對封閉隔離空間的設施。下面工程圍擋廠家為您解說更多的相關信息。

The engineering enclosure is a facility to isolate the construction site from the external environment and make the construction site a relatively closed and isolated space. The engineering enclosure manufacturer will explain more relevant information for you.

工程圍擋的設置使用

Setting and use of engineering enclosure

根據施工地點，條件不同而不同。建筑工程須全封閉，市區主要道路或人流大的不得低于2.5米，其余不得低于1.8米，一般半封閉多見于市政工程，所謂的半封閉指兩面或三面設立圍擋，一面或兩面開放，便于施工機具材料的進出。

The conditions vary according to the construction site. The construction works must be completely closed. The main roads or people flow in the urban area shall not be less than 2.5 meters, and the rest shall not be less than 1.8 meters. Generally, semi-closed works are mostly seen in municipal works. The so-called semi-closed means that two or three sides are set up with fences, and one or two sides are open to facilitate the access of construction machinery and materials.

具體要怎么設置根據招標文件、圖紙、現場環境，施工組織設計在保證的情況下來確定。舉個例子，假設市政工程在鬧市，一個道路維修工程，半幅開放交通，半幅維修，這個時候就需要全封閉，保證不會有行人誤入而引發危險。

The specific setting shall be determined according to the bidding documents, drawings, site environment, and construction organization design under the premise of ensuring safety. For example, suppose that the municipal engineering is in the downtown area, a road maintenance project, half open traffic and half maintenance. At this time, it needs to be completely closed to ensure that no pedestrians will enter by mistake and cause danger.

再假設一條新建道路位于郊區，一端與老路相接，另一端為野地，那么只需要在新老路交接處設立單面的圍墻和一扇門即可，其余三面可以不封閉。全封閉圍擋：將整個施工范圍用硬質材料圍起來，組成全封閉圍墻半封閉：有一面或多個面不設圍擋的，即為半封閉。

Suppose that a new road is located in the suburbs, one end of which is connected with the old road, and the other end is a field, then it is only necessary to set up a single-sided fence and a door at the junction of the old road and the new road, and the other three sides can not be closed. Fully enclosed enclosure: the whole construction scope is enclosed with hard materials to form a fully enclosed enclosure and semi-enclosed enclosure: if there is one or more sides without enclosure, it is semi-enclosed.

主體結構為鋼結構，多數情況下以角鋼焊接的方籠為主立柱，在一些特殊路段也有用矩形管、球形網件等連接，地基澆筑大小受施工現場土質、受風大小影響。面板部分主要用鍍鋅板封面，還有部分用彩鋼板，此中工藝圍擋高度2~8米，畫面及照明設施，一般與甲方協商，畫質肯定是越貴相應的效果質保時間久一些。

The main structure is steel structure. In most cases, the square cage welded with angle steel is used as the main column. In some special sections, rectangular pipes and spherical mesh pieces are also used for connection. The size of foundation pouring is affected by the soil quality at the construction site and the size of wind. The panel part is mainly covered with galvanized sheet, and the other part is made of color steel plate. The height of the process enclosure is 2~8 meters. The picture and lighting facilities are generally negotiated with Party A. The more expensive the picture quality is, the longer the quality assurance period of the corresponding effect will be.

工程圍擋的制作注意

Precautions for construction of engineering enclosure

不過實際制作工程圍擋廣告時有幾點忌諱的地方，布局不能過于平，在色彩上盡量鮮艷忌諱整體色調暗淡無光起不到奪目的效果。內容上不能冗長沒有內容，空洞無物。然后層次上要清楚不能混亂，

However, there are a few taboos in the actual production of engineering enclosure advertisements. The layout should not be too flat, and the overall color should be as bright as possible. The content should not be lengthy and empty. Then it should be clear at the level that there should be no confusion,

工程圍擋在實際的制作過程當中，不一定是一帆風順的，有的時候有樹木的遮擋，有的時候有街角轉彎的限制，那么我們?yōu)榱四軌蚋玫耐怀龉こ虈鷵醯膹V告效應，那就要因地制宜，制作出適合自己項目的圍擋。

In the actual production process, the engineering fence is not always smooth. Sometimes it is covered by trees, and sometimes it is restricted by turning around the corner. So in order to better highlight the advertising effect of the engineering fence, we should make a fence suitable for our project according to local conditions.

工程圍擋廣告的排列要根據項目宣傳的實際情況來定，要有比較明晰的排列示意圖，這樣才能讓施工人員和開發商看得清楚明白。

The arrangement of the engineering enclosure advertisement should be determined according to the actual situation of the project publicity, and there should be a clear arrangement diagram, so that the construction personnel and developers can see clearly.

當施工圍擋安裝完畢后需要將施工工地和外界徹底隔離，以于不被不相干人等進入施工地域，以免進入施工地區發生危險。安裝好施工圍擋后請安排專人在安裝水工圍擋的外部進行巡邏維持因安裝圍擋引起道路不便的次序。更多的事項就來我們網站http://tt9788.com咨詢！

After the construction enclosure is installed, it is necessary to completely isolate the construction site from the outside, so that no irrelevant people can enter the construction area, so as to avoid danger in entering the construction area. After installing the construction enclosure, please arrange special personnel to patrol outside the installation of the hydraulic enclosure to maintain the order of road inconvenience caused by the installation of the enclosure. Come to our website for more matters http://tt9788.com consulting service